Sep 06 2009
how to replace the dome light on a 2008 honda accord?
- Turn the ceiling light switch OFF.
- Carefully pry the lens (A) off with a small screwdriver.
- Remove the screws, then remove the ceiling light (B).
- Disconnect the 3P connector (C) from the ceiling light.
- Check for continuity between the terminals.
-
- There should be continuity between the No. 1 and No. 2 terminals with the switch in the MIDDLE position.
- There should be continuity between the No. 2 and No. 3 (body ground) terminals with the switch in the ON position.
- There should be no continuity between the No. 1 and No. 2 terminals, and between the No. 2 and No. 3 (body ground) terminals with the switch in the OFF position.
- If the continuity is not as specified, check the bulb. If the bulb is OK, replace the ceiling light.
- Install the light in the reverse order of removal.

One Response to “how to replace the dome light on a 2008 honda accord?”
Leave a Reply
You must be logged in to post a comment.

[...] Continued here: how to replace the dome light on a 2008 honda accord? [...]